Shopping Cart
0 items in your cart
Welcome Sign in or create a new account

210 KSI, 16 Gauge - 1,000' Coil

210 KSI, 16 Gauge
https://images.kencove.us/prod/product/images/_x300/WM6T_2013.gif
 
product
16 gauge high-tensile wire makes it possible to build subdivision fences quickly and at a low cost. This wire will take over 10 years of abuse with minimal maintenance. The end and corner posts do not need to be braced because this wire acts as a lightweight rubber band. Since less weight is suspended, less tension is required. Light ⅜" - 1½" fiberglass rod posts can be used for the majority of the line posts. Wood posts or t-posts should be used at ends and corners. This wire is more of a psychological barrier rather than a physical barrier, so it needs to be electrified. Coils fit a standard spinning jenny, which may also be used to rewind the wire. If rewinding, use the largest diameter on your jenny.

  • Class 3 galvanized high-tensile wire
  • 210 KSI, 16 gauge
  • 1,000' coil
  • Polished electroplate
  • Ideal for interior electric fences
  • Requires minimal maintenance
  • Minimum break strength = 614 lbs


Item # WM6T
Weight 11.00 lbs
$27.25 COIL
QTY
 
Shipping
Status 
Low Stock

Similar Items
Item # WM6D 210 KSI, 16 Gauge
  • Class 3 galvanized high-tensile
  • Polished electroplate
  • Ideal for interior electric fences
  • Minimum break strength = 614 lbs
3,000' Coil
$70.75
 

Related Items
Item # TSJHH Kencove Spinning Jenny with Brake
  • Adjustable brake to control overspin
  • Accommodates most coil diameters

$119.75
Item # TCTHD 9" Heavy-Duty Wire Cutters
  • Strong jaws
  • Small enough to fit in your pocket!

$16.75
Item # HBS 1¾" Double-Barbed Staples
  • Class 3 galvanized
  • Double barbed for superior hold
  • Approximately 52 staples per pound
Per Pound
$2.50
Item # TDSD Staple Starter
  • Very simple to use
  • Has no moving parts to damage
  • Saves your fingers and prevents staples from mushrooming
  • Use with standard fence staples up to 8 gauge
Standard
$11.95
Item # TCHK Kencove Chain Grab
  • Long chain with anchor hook
  • Accommodates smooth and coated wire
  • High quality cast walking arms and grabs

$67.50
Item # C12 Kiwi Crimp Sleeve, Gritted
  • Gritted
  • 14 or 16 ga smooth wire
  • Made in the USA
Item # TFFG 4-Slot Crimping Tool, Red Handle
  • Crimps all gauge crimp sleeves
  • 5 year warranty
  • Made in China

$54.50
Item # CWL1416 Quick Splice
  • Splices wire without a tool!
  • Internal spring-loaded clamps
  • Creates strong inline splices
14-16 ga
$1.65
Item # CWV1416 Quick End
  • Terminates wire at end posts
  • Internal spring-loaded clamps
  • Use with 14 - 16 gauge wire
14-16 ga
$1.49
Item # TFP Fence Pliers
  • Great for cutting soft wire
  • Hammer head and staple puller

$9.75
Item # HTSHD Tension Indicator Spring
  • Indicates amount of tension on fence wire
  • Class 3 galvanized coating
  • Longest lasting spring on the market!
Heavy Duty
$6.75
Item # SAS Original KIWI Strainer
  • Spring holds latch tight against cog
  • Permanently hinged, flipper type catch
  • Hot-dip galvanized to resist weathering

$5.30
Item # TFH Handle for Hayes Tighteners
  • Tensions Hayes-style strainers

$5.00
Item # TDB3813 ⅜" x 13" Ship Auger Drill Bit
  • Hollow center flutes clear chips quickly
  • 9.5" twist length and a 13" overall length
  • Bore perfectly sized holes for brace pins

$7.95
Item # H1PE Brace Pin 10"
  • Hot-dip galvanized
  • 10" length
  • 0.33" - 0.35" diameter
Item # HQBS12 12' Quick Brace
  • 18', 8 gauge, steel cable with a pre-formed loop
  • Fast and easy to install
  • Use to make a single 12' brace
One Kit
$8.10
Item # TGTCC Torque Tool
  • 10:1 Ratio
  • Quick Release Cam
  • Works with Gripples, Fastlinks, Fastloks and Quick Ends
Heavy Duty
$99.75