Shopping Cart
0 items in your cart
Welcome Sign in or create a new account

210 KSI, 16 Gauge - 6,000' Coil

210 KSI, 16 Gauge
https://images.kencove.us/prod/product/images/_x300/WM6.gif
 
product
16 gauge high-tensile wire makes it possible to build subdivision fences quickly and at a low cost. This wire will take over 10 years of abuse with minimal maintenance. The end and corner posts do not need to be braced because this wire acts as a lightweight rubber band. Since less weight is suspended, less tension is required. Light ⅜" - 1½" fiberglass rod posts can be used for the majority of the line posts. Wood posts or t-posts should be used at ends and corners. This wire is more of a psychological barrier rather than a physical barrier, so it needs to be electrified. Coils fit a standard spinning jenny, which may also be used to rewind the wire. If rewinding, use the largest diameter on your jenny.

  • Class 3 galvanized high-tensile wire
  • 210 KSI, 16 gauge
  • 6,000' coil
  • Polished electroplate
  • Ideal for interior electric fences
  • Requires minimal maintenance
  • Minimum break strength = 614 lbs


Item # WM6
Weight 66.00 lbs
$87.50 COIL
QTY

Save on 25 - $85.25
Shipping
Status 

Similar Items
Item # WM6D 210 KSI, 16 Gauge
  • Minimum break strength = 614 lbs
  • Ideal for interior electric fences
  • Polished electroplate
  • Class 3 galvanized high-tensile
3,000' Coil
$47.50
 
Item # WM6T 210 KSI, 16 Gauge
  • Minimum break strength = 614 lbs
  • Ideal for interior electric fences
  • Polished electroplate
  • Class 3 galvanized high-tensile
1,000' Coil
$18.75
 
Item # WM6TS 210 KSI, 16 Gauge
  • Minimum break strength = 614 lbs
  • Ideal for interior electric fences
  • Polished electroplate
  • Class 3 galvanized high-tensile
 

Related Items
Item # TSJHH Kencove Spinning Jenny with Brake
  • Minimum break strength = 614 lbs
  • Ideal for interior electric fences
  • Polished electroplate
  • Class 3 galvanized high-tensile

$99.75
Item # TCTHD 9" Heavy-Duty Wire Cutters
  • Minimum break strength = 614 lbs
  • Ideal for interior electric fences
  • Polished electroplate
  • Class 3 galvanized high-tensile

$16.50
Item # HBS 1¾" Double-Barbed Staples
  • Minimum break strength = 614 lbs
  • Ideal for interior electric fences
  • Polished electroplate
  • Class 3 galvanized high-tensile
Per Pound
$2.50
Item # TDSD Staple Starter
  • Minimum break strength = 614 lbs
  • Ideal for interior electric fences
  • Polished electroplate
  • Class 3 galvanized high-tensile
Standard
$11.95
Item # TCHK Kencove Chain Grab
  • Minimum break strength = 614 lbs
  • Ideal for interior electric fences
  • Polished electroplate
  • Class 3 galvanized high-tensile

$67.50
Item # C12 Kiwi Crimp Sleeve, Gritted
  • Minimum break strength = 614 lbs
  • Ideal for interior electric fences
  • Polished electroplate
  • Class 3 galvanized high-tensile
Item # TFFG 4-Slot Crimping Tool, Red Handle
  • Minimum break strength = 614 lbs
  • Ideal for interior electric fences
  • Polished electroplate
  • Class 3 galvanized high-tensile

$54.50
Item # CWL1416 Quick-Splice
  • Minimum break strength = 614 lbs
  • Ideal for interior electric fences
  • Polished electroplate
  • Class 3 galvanized high-tensile
14-16 Gauge
$1.59
Item # CWV1416 Quick-End
  • Minimum break strength = 614 lbs
  • Ideal for interior electric fences
  • Polished electroplate
  • Class 3 galvanized high-tensile
14-16 Gauge
$1.49
Item # TFP Fence Pliers
  • Minimum break strength = 614 lbs
  • Ideal for interior electric fences
  • Polished electroplate
  • Class 3 galvanized high-tensile

$9.75
Item # HTSHD Tension Indicator Spring
  • Minimum break strength = 614 lbs
  • Ideal for interior electric fences
  • Polished electroplate
  • Class 3 galvanized high-tensile
Heavy Duty
$5.75
Item # SAS Original KIWI Strainer
  • Minimum break strength = 614 lbs
  • Ideal for interior electric fences
  • Polished electroplate
  • Class 3 galvanized high-tensile

$4.30
Item # TFH Handle for Hayes Tighteners
  • Minimum break strength = 614 lbs
  • Ideal for interior electric fences
  • Polished electroplate
  • Class 3 galvanized high-tensile

$5.00
Item # TDB3813 ⅜" x 13" Ship Auger Drill Bit
  • Minimum break strength = 614 lbs
  • Ideal for interior electric fences
  • Polished electroplate
  • Class 3 galvanized high-tensile

$7.95
Item # H1PE Brace Pin 10"
  • Minimum break strength = 614 lbs
  • Ideal for interior electric fences
  • Polished electroplate
  • Class 3 galvanized high-tensile
Item # HQBS12 12' Quick Brace
  • Minimum break strength = 614 lbs
  • Ideal for interior electric fences
  • Polished electroplate
  • Class 3 galvanized high-tensile
One Kit
$6.75
Item # TGTCC Heavy-Duty Tension Tool
  • Minimum break strength = 614 lbs
  • Ideal for interior electric fences
  • Polished electroplate
  • Class 3 galvanized high-tensile

$99.75