 |
Similar Items |
 |
|
Item # CGM |
Gripple Medium
- Use to terminate 10 to 14 gauge smooth wire and 15½ gauge barbed wire
- Simple and effective way to join or tension wire
- Patented ceramic locking mechanism
|
|
| |
|
Item # JH95 |
2-Stroke Gas-Powered Post Driver
- Portable gas-powered post driver
- Powered by 2.3 horsepower, 2-stroke engine
- 4" barrel accepts posts up to 3⅞" in diameter
- Includes 3 adapter sleeves: 1⅞", 2½", and 3⅞"
- Weighs 45 pounds
|
|
| |
|
Item # PD80 |
Kencove PD80 Post Driver
- Drives posts up to 7⅛" diameter X 10' tall
- 30,000 pounds of impact at full stroke
- Manual tilt: 15-degree front-back/15-degree side-side
- Includes 3-point hitch and secure-stand base
|
|
| |
|
Item # TTSDG |
Titan Fence Staple Gun
- Powerful, cordless gun drives 1¾" staples
- Lightweight and easy to operate
- Notched nose that is designed for fence wire applications
- Single-shot actuation
- Powered by liquid-petroleum gas
|
|
| |
|
Item # CGM-20-200 |
Gripple Medium - Pack of 20
- Use to terminate 10 to 14 gauge smooth wire and 15½ gauge barbed wire
- Simple and effective way to join or tension wire
- Patented ceramic locking mechanism
|
|
| |
|
Item # HCSSK |
1¾" Collated Staples for Titan Fence Staple Gun
- 1¾" staples
- Class 4, hot-dip galvanized for maximum life
- Diamond coating and 45-degree precision divergent points for superior holding power
- Collated for easy loading
- Bucket of 1,500
|
|
| |
|
Item # PD100 |
Kencove PD100 Post Driver
- Drives posts up to 8¾" diameter X 10' tall
- 71,500 pounds of impact at full stroke
- Manual tilt: 15-degree front-back/15-degree side-side
- Includes 3-point hitch and secure-stand base
|
|
| |
|
Item # U-ESP6V-ZBD |
Zareba Black Diamond ESP6V-ZBD
- 6-volt solar energizer
- 0.20 output joules
- Low-impedance
- Works with polywire, polyrope, polytape, steel wire, and aluminum wire
|
|
| |
|
Item # U-GHPY-Z |
Zareba Plastic Gate Handle
- Standard-duty plastic gate handle
- Insulates against shock
- Can be used with all fence wire, except polyrope and polytape
|
|
| |
|
Item # U-UGCC200-EB |
ElectroBraid Copper Lead-Out Wire
- 15,000 volt heavy insulation for wiring
- Can be used to connect energizer to fence, for ground rod connections, or under gates
- Always use copper to copper connections
- 200' roll
|
|
| |
|
Item # CGT |
Gripple T-Clip
- For use with 10 to 14 gauge wire
- Secures wire at start or end of the fence line
- No knotting or stapling required
- Recommended for woven wire fence
|
|
| |
|
Item # PD80H |
Kencove PD80H Post Driver
- Drives posts up to 7⅛" diameter X 10' tall
- 30,000 pounds of impact at full stroke
- Hydraulic tilt: 15-degree front-back/15-degree side-side
- Includes 3-point hitch and secure-stand base
|
|
| |
|
Item # U-ITCPW-RS |
Red Snap'r Wood Post/T-Post Capper Insulator
- Fits standard t-posts
- For use with steel wire, aluminum wire, polywire, polyrope, and polytape up to 2"
- Serves as an insulator for the top line of fence
- UV-stabilized
|
|
| |
|
Item # CGT-10-200 |
Gripple T-Clip - Pack of 10
- For use with 10 to 14 gauge wire
- Secures wire at start or end of the fence line
- No knotting or stapling required
- Recommended for woven wire fence
|
|
| |
|
Item # PD100H |
Kencove PD100H Post Driver
- Drives posts up to 8¾" diameter X 10' tall
- 71,500 pounds of impact at full stroke
- Hydraulic tilt: 15-degree front-back/15-degree side-side
- Includes 3-point hitch and secure-stand base
|
|
| |
|
Item # CGLP |
Gripple Large Plus
- Use to terminate 7½ to 10 gauge smooth wire
- Ceramic locking mechanism for superior grip
|
|
| |
|
Item # PD80SS |
Kencove PD80SS Post Driver
- Drives posts ties up to 7⅛" diameter X 10' tall
- 30,000 pounds of impact at full stroke
- Manual tilt: 15 degree front-back/15 degree side-side
- Includes skid-steer mounting bracket and secure-stand base
|
|
| |
|
Item # PD100SS |
Kencove PD100SS Post Driver
- Drives posts up to 8¾" diameter X 10' tall
- 71,500 pounds of impact at full stroke
- Manual tilt: 15-degree front-back/15-degree side-side
- Includes skid-steer mounting bracket and secure-stand base
|
|
| |
|
Item # PD80HSS |
Kencove PD80HSS Post Driver
- Drives posts up to 7⅛" diameter X 10' tall
- 30,000 pounds of impact at full stroke
- Hydraulic tilt: 15 degree front-back/15 degree side-side
- Includes skid-steer mounting bracket and secure-stand base
|
|
| |
|
Item # PD100HSS |
Kencove PD100HSS Post Driver
- Drives posts up to 8¾" diameter X 10' tall
- 71,500 pounds of impact at full stroke
- Hydraulic tilt: 15-degree front-back/15-degree side-side
- Includes skid-steer mounting bracket and secure-stand base
|
|
| |
|
Item # CG1 |
Gripple 1
- Use to terminate 11 to 15 gauge wire
- Simple and effective way to join or tension wire
|
|
| |
|
Item # CG1-20-200 |
Gripple 1 - Pack of 20
- Use to terminate 11 to 15 gauge wire
- Simple and effective way to join or tension wire
|
|
| |
|
Item # EXD1 |
Stafix X Series
- Operates from 12v battery or 110v plug
- Adjustable pulse speed
- Includes battery lead set and power adapter
|
|
| |
|
Item # U-CG1 |
Gripple 1, Old-Style
- Use to easily tension or terminate wire at end posts
- Simply push the wire into the end, leaving a tail for easy adjustment or tensioning
- To increase wire tension, simply pull the wire through even more
- For use with 11 to 15 gauge wire
- NON-RELEASABLE, old-style design
|
|
| |
|
Item # CGS |
Gripple Small
- Use to tension 13 to 17 gauge mild wire
- Simple and effective way to join or tension wire
- Patented ceramic locking mechanism
|
|
| |
|
Item # U-20401 |
Donalds-Style Stainer
- Easily adjusts wire tension on the fence line
- Aluminum cog
- Galvanized strap
- Designed to be used with a ½" drive ratchet or crescent wrench
|
|
| |
|
Item # CGS-20-300 |
Gripple Small - Pack of 20
- Use to tension 13 to 17 gauge mild wire
- Simple and effective way to join or tension wire
- Patented ceramic locking mechanism
|
|
| |
|
Item # CGJ |
Gripple Jumbo
- Use to terminate 10 to 12½ gauge wire
- Simple and effective way to join or tension wire
- Max load = 1,320 pounds
|
|
| |
|
Item # U-MP-5E |
Fi-Shock Ceramic Wood Post Insulator
- Single-groove wood-post insulator with washer and double-headed nail
- Can be used with steel wire, aluminum wire, polyrope and polywire
|
|
| |
|
Item # CGJ-10-120 |
Gripple Jumbo - Pack of 10
- Use to terminate 10 to 12½ gauge wire
- Simple and effective way to join or tension wire
- Max load = 1,320 pounds
|
|
| |
|
Item # CGT2 |
Gripple T-Clip 2
- For 7½-10 gauge wire and 12½- 15 ga barbed wire
- Use to secure wires at the beginning or end of a fence line
- No need to knot or staple the wire, simply twist and push to engage the internal spring
- Recommended for woven wire fence
|
|
| |
|
Item # CGT2-10-120 |
Gripple T-Clip 2 - Pack of 10
- For 7½-10 gauge wire and 12½- 15 ga barbed wire
- Use to secure wires at the beginning or end of a fence line
- No need to knot or staple the wire, simply twist and push to engage the internal spring
- Recommended for woven wire fence
|
|
| |
|
Item # CGD4 |
Gripple Dynamic #4
- Ideal for heavy load anchoring and structural bracing
- Quick and simple installation
- Fits 4mm (5⁄32") - 4.75mm (3⁄16") wire
- Maximum Load 1,650 lbs - 2,200 lbs
- Unlock and re-tension without releasing the load
|
|
| |
|
Item # CGKEY |
Gripple Adjustment Key
- Adjust or release Gripple connectors
- Use with t-clips, small, medium, and large Gripples
|
|
| |
|
Item # CGWT |
Gripple Twister
- Wraps around wire end to prevent injury
- Use with 10 to 14 gauge wire
|
|
| |
|
Item # PDSHD8H |
Kencove PD8H Post Driver
- Drives posts up to 7⅛" diameter X 10' tall
- 30,000 pounds of impact at full stroke
- Hydraulic tilt: 15-degree front-back/15-degree side-side
- Hydraulic requirements: 3-4 GPM @ 1,500 PSI
|
|
| |
|
Item # U-EAC25M-EB |
ElectroBraid EAC25M-EB
- 110-volt, plug-in energizer
- 2.5 output joules
- Ultra-low-impedance
- For all animal types
|
|
| |
|
Item # GW2 |
KIWI Gate Wheel 2"
- Ideal for large, heavy gates
- Bolts onto 1.625" to 2" tube gates
|
|
| |
|
Item # PGD2000 |
Titan PGD2000
- Powerful and portable gas-powered post driver
- Powered by 1.3 horsepower, Honda 4-stroke engine
- 2" barrel accepts posts from 1" to 1⅞" in diameter
- 1" adapter sleeve included for ¾" to 1" posts
- Weighs 35 pounds
|
|
| |
|
Item # GLA |
KIWI Gate Anchor
- Hold gate open in any position
- Prevents gate end from sagging or swinging
- For use with 1 5/8" - 2" tube gates
|
|
| |
|
Item # PGD3200 |
Titan PGD3200
- Powerful and portable gas-powered post driver
- Powered by 1.3 horsepower, Honda 4-stroke engine
- 3¼" barrel accepts posts from 2" to 3⅛" in diameter
- 2" adapter sleeve included for 1" to 2" posts
- Weighs 45 pounds
|
|
| |
|
Item # U-SS-725CS |
Havahart SS-725CS
- 110-volt, plug-in energizer
- Use to contain pets or to keep critters out
- Includes a mounting stake for easy installation
- Continuous AC output - NOT FOR USE with tape, twine, or electric netting
|
|
| |
|
Item # PV4CRS |
Vector Model 4 Post Driver w/ Rock Spike
- Drives posts up to 12' tall and up to 12" diameter
- 130,000 pounds of impact at full stroke
- 840-pound solid steel hammer
- Includes rock spike with swing arm
|
|
| |
|
Item # U-EAC2M-Z |
Zareba EAC2M-Z
- 115-volt, plug-in energizer
- 0.05 output joules
- Controls up to 2 miles of fence
- Low-impedance
- Ideal for dogs, rabbits, and poultry
|
|
| |
|
Item # EX63R |
Stafix M63R Energizer with Remote
- One of the most powerful energizers in the world
- 63.0 output joules
- Includes remote control
- Uses 220/240 volt power source
- Two-year warranty
|
|
| |
|
Item # EKD16WIFF |
Kencove Wi-Fi Dual-Purpose Energizer w/ Fault Finder
- 16-joule output
- Can operate on a 110-volt electric plug or a 12-volt battery
- Wi-Fi compatibility allows you to monitor the voltage and turn on or off from your mobile phone
- Low-impedance
- 2-year warranty includes lightning damage
- Includes VPK Fault Finder and Voltmeter
|
|
| |
|
Item # EXS.5 |
Stafix Solar Energizer
- Portable unit with simple operation
- High output, low impedence
- 2 year warranty
|
|
| |
|
Item # F78-5D |
7⁄8" FiberRod SunGuard
- Pre-drilled every 2"
- Will not rust, rot or crack due to cold
- Coated to prevent splintering
|
|
| |
|
Item # HQBS12 |
Quick Brace
- 16½', 8 gauge, steel cable with a pre-formed loop
- Fast and easy to install
- Use to make a single 12' brace
|
|
| |
|
Item # I6X |
12" Offset Bracket
- Extends wire 12" from post
- Great insulation from the bracket wire
- Easy to attach onto smooth or woven wire
|
|
| |
|
Item # NAS |
Net Anchor Stakes
- Includes 10 stakes and 10 tie-back strings
- Provides additional support for electric net corner posts
|
|
| |
|
Item # PF-WR1X0.5X24 |
Welded Cage Wire, 1"x½" Spacing
- 14 gauge, hot-dip galvanized welded cage wire
- 1"x½" spacing
- 24" height
- 100' roll
- Ideal for rabbit enclosures and cages
|
|
| |
|
Item # PF-WR1X0.5X30 |
Welded Cage Wire, 1"x½" Spacing
- 14 gauge, hot-dip galvanized welded cage wire
- 1"x½" spacing
- 30" height
- 100' roll
- Ideal for rabbit enclosures and cages
|
|
| |
|
Item # PF-WR1X1X24 |
Welded Cage Wire, 1"x1" Spacing
- 14 gauge, hot-dip galvanized welded cage wire
- 1"x1" spacing
- 24" height
- 100' roll
- Ideal for rabbit enclosures and cages
|
|
| |
|
Item # PF-WR1X1X30 |
Welded Cage Wire, 1"x1" Spacing
- 14 gague, hot-dip galvanized welded cage wire
- 1"x1" spacing
- 30" height
- 100' roll
- Ideal for rabbit enclosures and cages
|
|
| |
|
Item # PF-WR1X2X24 |
Welded Cage Wire, 1"x2" Spacing
- 14 gauge, hot-dip galvanized welded cage wire
- 1"x2" spacing
- 24" height
- 100' roll
- Ideal for rabbit enclosures and cages
|
|
| |
|
Item # PF-WR1X2X30 |
Welded Cage Wire, 1"x2" Spacing
- 14 gauge, hot-dip galvanized welded cage wire
- 1"x2" spacing
- 30" height
- 100' roll
- Ideal for rabbit enclosures and cages
|
|
| |
|
Item # PGD3875A |
Titan PGD3875A
- CLOSEOUT ITEM
- Powerful and portable gas-powered post driver
- Powered by 1.2 horsepower, 4-stroke engine
- 4" barrel accepts posts up to 3⅞" in diameter
- Includes 1", 2", and 3" adapter sleeves for smaller posts
- Weighs 45 pounds
|
|
| |
|
Item # PGD3875R |
Titan PGD3875R
- RECONDITIONED UNIT
- Powerful and portable gas-powered post driver
- Powered by 1.2 or 1.3 horsepower, 4-stroke engine
- 4" barrel accepts posts up to 3⅞" in diameter
- Includes 1", 2", and 3" adapter sleeves for smaller posts
- Weighs 50 pounds
|
|
| |
|
Item # U-451 |
Dare Corner/End Insulator Assembly
- Perfect for high-tensile fence corners and ends
- Withstands continuous strain
- Self-locking nut will no vibrate loose
- Zinc-plated to resist rust
- ⅜" high-carbon steel bracket will not bend
|
|
| |
|
Item # U-A-1 |
Power Wizard Warning Sign
- Large black letters printed on both sides
- 3 pre-drilled holes for hanging or nailing
- Highly visible
- 7½" x 3¾"
|
|
| |
|
Item # U-A5LVT-FS |
Fi-Shock Multi-Light Tester
- 5-light electric fence tester
- Reads between 600 and 5,500 volts
- Checks energizer for proper output
- Allows for diagnostics of shorts on fence
- Easy to use
|
|
| |
|
Item # U-DJ.5EATAPERW |
½" Electric Ribbon
- ½" ribbon
- Ideal for rotational grazing
- 5 stainless-steel conductors
|
|
| |
|
Item # U-DJ.5ETAPEW |
½" Electric Ribbon
- ½" ribbon
- Ideal for rotational grazing
- 6 stainless-steel conductors
|
|
| |
|
Item # U-EA5M-Z |
Zareba EA5M-Z
- 110-volt, plug-in energizer
- 0.10 output joules
- Low-impedance
- For gardens and small animals
|
|
| |
|
Item # U-EAC10A-FS |
Fi-Shock EAC10A-FS
- 110-volt, plug-in energizer
- Low-impedance
- Use for small animals and gardens
- Can be used with all fence types
|
|
| |
|
Item # U-EFP48 |
Zareba Steel Rod Post
- Can be used as a line post
- Ideal for portable fencing
- 16 gauge anchor plate
- 5⁄16" diameter
|
|
| |
|
Item # U-FSTXW200 |
Stafix Extreme Wire
- 105-times more conductive than standard polywire
- 6 tinned-copper strands for maximum conductivity
- UV-stabilized for long life
- Highly visible
|
|
| |
|
Item # U-G669W |
Gallagher Polytape Insulator
- Wood post insulator
- Specially designed for polytape and turbo tape up to 1½" wide
- Unique rubber pads prevent tape from moving and fraying
- Positive locking and quick release for re-tensioning of tape as required
- UV-stabilized
|
|
| |
|
Item # U-GHWKRW-EB |
ElectroBraid Gate Kit
- Complete set of components for a safe 15' to 20' electric horse gate
- Includes one gate handle, one activator plate, two copper split-bolts, one ElectroBraid roller insulator, and four screws
- Provides easy access in or out of paddocks
|
|
| |
|
Item # U-ITRXB-Z |
Zareba Backside T-Post Insulator
- Backside t-post claw insulators
- Holds wire 5" from post
- Accommodate polywire, polyrope, steel wire, and aluminum wire
- Fits standard t-posts
- Made in the USA
|
|
| |
|
Item # U-ITY-BL |
Blitzer T-Post Insulator
- Wraparound t-post claw insulators
- Hold wire 5" from post
- Accommodate polywire, polyrope, steel wire, and aluminum wire
- Fit standard t-posts
- Made in the USA
|
|
| |
|
Item # U-PT25TPX |
Red Snap'r T-Post Polytape Insulator
- For use on standard t-posts
- Extend polytape 5" from post
- Accommodate polywire, polyrope, steel wire, aluminum wire, and up to 1½" polytape
- Fit standard t-posts
- Made in the USA
|
|
| |
|
Item # U-PT25WPX |
Red Snap'r Wood Post Polytape Insulator
- For use on wood posts
- Extend polytape 5" from post
- Accommodate polywire, polyrope, steel wire, aluminum wire, and up to 1½" polytape
- Nails included
- Made in the USA
|
|
| |
|
Item # U-S16100200 |
SpeedCo Gate Anchor
- Fits round tube gates with 1¾" to 2 " outside diameter
- Holds livestock gates open in any position
- Prevents gate from swinging and sagging
- Includes hardware
|
|
| |
|
Item # U-SC-70 |
Fi-Shock Slant-Nail Insulator
- Extends wire 2½" from post
- Includes double-headed nails
- Wide grooves allow for use with all gauges of wire
- UV-stabilized
- Wide flange prevents shorting
- Yellow, pack of 25
|
|
| |
|
