Subtotal $0.00
Products
Quick Add
Titan Post Drivers
Products
Order By:
Assembled and Serviced in USA
Powered by a 1.2 hp, 4-stroke engine, gas powered (no mixing oil)
Delivers up to 1,200 bpm
Comes with 1", 1.75", and 2.5" steel barrel sleeves to adapt to your driving needs
Perfect for hobby farmers, ranchers, and residential users driving T-posts, pipe, or rods
Lightweight and compact Post Driver (t-post, rods, pipe)
Lightweight and compact
Powered by Honda GX35 / 4-stroke engine (no need to mix gas)
Comes with 1", 1.75", and 2.5" steel barrel sleeves
Delivers up to 1,600 bpm
Perfect for hobby farmers, ranchers, and residential users
- Weighs 30 pounds making it the lightest gas-powered driver available
- 1,500-2,000 beats-per-minute
- Powered by 1.3 horsepower, 4-stroke engine
- 100% self-contained
- Handles are designed for comfort
- Simple recoil pull start with trigger throttle and integrated stop button
- One-year limited warranty
- Powered by 1.3 horsepower, 4-stroke engine
- 3¼" barrel accepts posts up to 3" in diameter
- Includes 1" and 2" adapter sleeves for smaller posts
- Powerful and portable gas-powered post driver
- Weighs 30 pounds
- Powered by 1.3 horsepower, 4-stroke engine
- 4" barrel accepts posts up to 3 7/8" in diameter
- Includes 1", 2" and 3" adapter sleeves for smaller posts
- Powerful and portable gas-powered post driver
- Weighs 50 pounds
- Powered by 1.3 horsepower, Honda 4-stroke engine
- 2" barrel accepts posts up to 1 7/8" in diameter
- Includes 1" adapter for smaller posts
- Powerful and portable gas-powered post driver
- 1,750 bpm
- Customize with Handle Kits
- Weighs 35 pounds
- Powered by 1.3 horsepower, Honda 4-stroke engine
- 3 1/4" barrel accepts posts up to 3 1/8" in diameter
- Includes 2 1/2" adapter for smaller posts
- Powerful and portable gas-powered post driver
- 1,850 bpm
- Customize with Handle Kits
- Weighs 45 pounds
M6x30 socket head cap screw 10 ea
4x w/washer housing to engine / 6x housing to upper body
6004-2RS bearing
42mm snap ring
20mm snap ring
6201-2RS bearing
Clutch housing
Clutch drum
Alignment pin pk 2
Gasket clutch to body
Oil seal
Hammer O-ring 42.5×3.8
Hammer
Damper washer
Damper guide O-rings 44×5.3 2 ea.
Damper guide ring
Damper cup
Anvil
Anvil O-ring 78×3.8
Replacement Throttle Body with Harness containing Cable & Stop Wire. Throttle Body has an auto-reset stop button. Use on PGD2000, PGD3200, PGD2000X, PGD3200X, PGD3200XPM Drivers
O-ring 76×2.65 Nitrile
O-ring 37.5×3.5 Viton pk 2
O-ring 40×5.3 Viton pk 2
O-ring 45×3.5 Viton
O-ring 56×2.65 Nitrile
Titan EP 0 Grease, 4 oz
Crank pin
Crank shaft
6004-2RS bearing
6000-2RS bearing
42mm snap ring
20mm snap ring 3 ea
Key 6x6x12
Gasket clutch to body
M8x15 button head cap screw PGD2000 / PDG3200 only
M8x20 button head cap screw w/washer pk 4
M5x15 socket head cap screw w/washer pk 4
M6x30 socket head cap screw pk 6
M8x60 socket head cap screw w/Nord-lock washers pk 6
M6x30 socket head cap screw w/washer pk 4
- Mounts on Bottom
- Dual Throttle Control
- Additional Cushioned Handles
- Compatible with PGD2000X or PGD3200X Driver
- Durable plastic design
- Locking latches
- Integrated carrying handle
- For PGD2000, PGD2000X, PGD3200 and PGD3200X post drivers
For PGD3875 driver Only
Rugged, custom molded, poly storage and carry case with wheels for driver & accessories
For PGD2875 or PGD2875H drivers Only
Rugged, custom molded, poly storage and carry case with wheels for driver & accessories
- X Series - Commercial Duty Driver
- Self-Contained, Powerful and Portable Driver, 45 lbs
- Honda GX35 1.3 hp, 4 stroke engine
- Heavy Duty Threaded Barrel
- Special Designed Barrel to accommodate POST MASTER PLUS POST
- Comes with 2" Adapter Sleeve, Solid Industrial Grade Poly
( ½", ¾", 1", 1¾", 2¼" & 2½" also available ) - X Series lets you customize with Handle Kits
- Accommodates material up to 3⅛" diameter max
Showing matches
1 - 25 of 42
1 - 25 of 42
