Subtotal $0.00
Products
Quick Add
Rebuild Kit
The Rebuild Kit is for our PGD2000 & PGD2000X Drivers and includes Viton O-rings for the hammer and anvil, O-rings for the damper assembly, housing O-ring seal, and EP 0 grease. A post driver works by simply moving compressed air. We recommend you replace all O rings annually or if you notice inadequate performance. Replacing these O rings will restore the compression and performance of your driver.
O-ring 76×2.65 Nitrile
O-ring 37.5×3.5 Viton pk 2
O-ring 40×5.3 Viton pk 2
O-ring 45×3.5 Viton
O-ring 56×2.65 Nitrile
Titan EP 0 Grease, 4 oz
$79.00
Item: PGD2000RKIT
Shipping
Status
Status
Alternative Items
- RECONDITIONED UNIT
- Powerful and portable gas-powered post driver
- Powered by 1.3 horsepower, Honda 4-stroke engine
- 2" barrel accepts posts from 1" to 1⅞" in diameter
- 1" adapter sleeve included for ¾" to 1" posts
M6x30 socket head cap screw 10 ea
4x w/washer housing to engine / 6x housing to upper body
6004-2RS bearing
42mm snap ring
20mm snap ring
6201-2RS bearing
Clutch housing
Clutch drum
Alignment pin pk 2
Gasket clutch to body
Oil seal
- Powered by 1.3 horsepower*, Honda 4-stroke engine
- 2" barrel accepts posts up to 1 7/8" in diameter
- Includes 1" adapter for smaller posts
- Powerful and portable gas-powered post driver
- 1,750 bpm
- Customize with Handle Kits
- Weighs 35 pounds
Crank pin
Crank shaft
6004-2RS bearing
6000-2RS bearing
42mm snap ring
20mm snap ring 3 ea
Key 6x6x12
Gasket clutch to body
Hammer O-ring 37.5×3.55
Hammer
Damper washer
Damper guide O-rings 40×5.3 2 ea.
Damper guide ring
Damper cup
Anvil
Anvil O-ring 45×3.5
