Shop Revolution PostdriversSee all the Revolution Postdrivers products we carry.
View all Revolution Postdrivers productsNew Zealand made Fencing Post drivers
Why Choose Revolution Postdrivers
MADE IN NEW ZEALAND
Revolution Postdrivers have been proudly made in New Zealand from the start. Since 2003, D.R. Howells Engineering in Tuakau has built each unit in-house, ensuring top-quality products while supporting the local industry.
DESIGNED BY A FENCE CONTRACTOR
Every Revolution Post Driver is engineered from the ground up by Tony White, a full-time fencing contractor who still spends most days out on the fence line with his crew.
UNRIVALED VERSATILITY
Developed in response to New Zealand’s challenging farming conditions and diverse terrain, Revolution Post Drivers are built to perform in the toughest environments. Revolution continues to lead the way in fencing technology and innovation.
Revolution Telescopic 180
The Revolution 180 is the machine that started it all — the world's first rotational post driver, backed by 30+ years of development. A large stable base built for difficult hill country, with the scope of movement to ram multiple posts without repositioning your tractor. Runs comfortably on a 80 hp tractor and mounts to tractors, skid steers, tracked machines, and more.
- 190° of rotation - Ram multiple posts without moving your tractor. Braked hydraulic motor on a 1-inch high tensile chain drive for precise, powerful control.
- 600 mm (23.6”) end shift - Additional reach on top of the rotation, so the rammer goes to the post — not your tractor.
- Telescopic mast - Compacts to 3.1 m (10’2”) for travel. Extends to 5.4 m (17’9”) for full working height. 300 kg (661 lb) lead-filled hammer as standard, upgradable to 340 kg+ (750 lb+).
- Up to 11 tonne (24,250 lb) of pulling power - Pull strainers and posts on the spot via chain hook. More than a front-end loader, and faster because you're not moving the machine.
- Drive to ground level - Drive foots, deadman anchors, and subterranean tie-backs without extra tools. Remove the hammer entirely to drive below ground for fully buried applications.
- Up to 3 hydraulic legs - Level and stabilise on uneven ground. 1 under the mast, 2 under the base. A recommended upgrade for contoured terrain.
- Mounts to anything - Tractors, skid steers, tracked machines, diggers, and bulldozers. Switch between tractor and skid steer in minutes with a single plate change.
Revolution Telescopic Swinga
The Revolution Swinga delivers the full capability of the Revolution range in a compact package. 220° of rotation via a hydraulic slew ring, 600 mm (23.6”) of end shift, and the same telescopic mast as the 180 — without the subframe. No offside interference means you can point it through gaps between trees, into building corners, along retaining walls, or into tight stockyards. Mounts to tractors, skid steers, tracked machines, and more.
- 220° of rotation - Hydraulic slew ring, geared down for a controlled, high-torque swing. More rotational range than any other model in the Revolution lineup.
- Telescopic mast - Compacts to 3.1 m (10’2”) for travel. Extends to 5.4 m (17’9”) for full working height. 300 kg (661 lb) lead-filled hammer as standard, upgradable to 340 kg+ (750 lb+).
- 600 mm (23.6”) end shift - Additional reach on top of the rotation, so the rammer goes to the post — not your tractor.
- Up to 3 hydraulic legs - Level and stabilise on uneven ground. 1 under the mast, 2 under the base. A recommended upgrade for contoured terrain.
- Up to 11 tonne (24,250 lb) of pulling power - Pull strainers and posts on the spot via chain hook. More than a front-end loader, and faster because you're not moving the machine.
- Drive to ground level - Drive foots, deadman anchors, and subterranean tie-backs without extra tools. Remove the hammer entirely to drive below ground for fully buried applications.