KIWI On-line Strainer

★★★★★(20) | Weight: 0.39LB | Item# SSDK

The KIWI On-line Wire strainer is our strongest on-line strainer. This strainer is made in the USA and features a solid zinc cog and a class 3 galvanized U-shaped pin.  

It can be installed directly onto the wire strand without any cutting or crimping.   

To install the KIWI On-line Strainer, simply insert the wire material into the slot on the strainer, use a tool to apply tension and remove any slack, then lock in place with the provided U-shaped pin. You can use a ½" drive socket wrench to apply initial tension, but for best results, use the EZ Daisy Strainer Handle (TFD) or the convenient Rapid Tightener (TFDR) to apply tension from start to finish. 

This strainer is strong enough for use with high tensile wire and will work on wire up to 9ga. The cog beveled and narrower than other on-line strainers. The wire slot is approximately 3/16” wide. 

*Not for use with coated wire products like Hotcote and Kencote. For coated wire applications use coated wire tensioners.

• Easy Installation
• Requires no cutting or crimping
• Tension with ½" drive socket wrench or EZ Daisy strainer tools
• Strong enough for use with high tensile wire
• Solid zinc cog
• Class 3 galvanized U-shaped pin
• Made in the USA