Quick End
★★★★★(73) | Weight: 0.06LB | Item# CWV811
The Quick End is an easy and fast way to terminate wire at end post. Wire will only pass through one direction (small to large end), spring-loaded embossed teeth grip wire and stops wire from pulling out. The Quick End is ideal for terminating short spans of fence or trellising. This Quick End works on 10-11 gauge smooth wire.
Steps to install the Quick End:
- Drill a 5/8" hole straight through end post
- Push wire through hole in post and minimum of 6" past post
- Slide Quick End on to wire, entering from small end, exiting large end. Slide until enters hole and square flange is flat against post.
- To tension wire quick and with ease use a Gripple torque tool: Basic =TGTTP/ Heavy Duty =TGTCC/ Contractor =TGTC
- When desired tension is achieve, cut excess wire leaving minimum of 6" tail, gently bend tail downward and secure with a staple.
If future adjustment is needed, remove staple and grab tail to achieve desired tension.
If not applying tension on wire we recommend you lightly tap square flange and pull wire for a snug fit.
Variant: 8-11 ga
Buy more; save more!
Buy 50+ for $1.69 each
Shipping Status
FREE ShippingQualified orders over $150
Warning: California residents click for Proposition 65 warning