Dynamic Diagonal Brace

Dynamic Diagonal Brace
https://img.kencove.us/products/hdd_medshot_2_2015_450_450-42109.jpg
product
Bracing is made easier with the Dynamic Diagonal Brace. The major advantage of a floating brace is that it only requires digging or pounding one post. The anchor post is the only permanently fixed component, everything else is simply set into place allowing flexibility for changing fence conditions. This brace system works by directing the force that is put on the anchor post into the ground via the floating foot and back through the brace cable to the buried end of the anchor post.

For added support, remove topsoil and replace it with a block or stone to act as a bearing plate. Install the composite foot on top of the bearing plate for added stability in freezing, thawing, or changes in moisture conditions.

  • Made up of 4 basic components
  • Includes fiberglass rod, foot block, and brace cable
  • Anchor post not included
  • Assembles in minutes after anchor post is in place
  • Build it on any terrain using an Organic-Certified Plastic Post or wood post
  • Use it at corners and ends of multi-strand high-tensile fences
  • Easier to build, nearly as strong as more complex H-braces
  • Hardware and brackets included, tool kit (HDDTK) sold separately

PRO TIP: To extend the life of your fiberglass rod, place a length of PVC pipe over the exposed piece of rod. It protects the rod from weathering and prevents splintering.