Shopping Cart
0 items in your cart

Welcome Sign in or create a new account

Products

Quick Add

Home / Connectors / Gripple

Gripple Medium - For 10-14 Ga

Gripples are an easy way to join or tension wire. The new Gripple Plus has a patented ceramic locking mechanism to deliver better grip and higher load strength. The ceramic mechanism locks onto the wire, resulting in a bond that lasts season after season. The ceramic rollers are rock-hard and super-tough to deal with extremely hard high-tensile wires.

Simply push the wire or cable into the ends, leaving at least a 2" tail to allow for easy adjustment or re-tensioning. Once in position, serrated rollers grip the wire as soon as reverse tension is applied.

The medium Gripples can be used on 10 to 14 gauge smooth wire and 15½ gauge barbed wire. A torque tool (TGTTP) is available for applications where high tensions are required.

Warning: California residents click for Proposition 65 warning

Item # CGM

Weight 0.06 lbs

Catalog page: 16

Product Manual

$1.19 EACH

Save on 1000 - $1.09 / 5000 - $0.99

Shipping
Status

FREE shipping on qualified orders over $75.00 to the continental US. Details

Similar Items

Item # JH95

2-Stroke Gas-Powered Post Driver

Portable gas-powered post driver
Powered by 2.3 horsepower, 2-stroke engine
4" barrel accepts posts up to 3⅞" in diameter
Includes 3 adapter sleeves: 1⅞", 2½", and 3⅞"
Weighs 45 pounds

Item # PD80

Kencove PD80 Post Driver

Drives posts up to 7⅛" diameter X 10' tall
30,000 pounds of impact at full stroke
Manual tilt: 15-degree front-back/15-degree side-side
Includes 3-point hitch and secure-stand base

Item # CGM-20-200

Gripple Medium - Pack of 20

Use to terminate 10 to 14 gauge smooth wire and 15½ gauge barbed wire
Simple and effective way to join or tension wire
Patented ceramic locking mechanism

Item # PD100

Kencove PD100 Post Driver

Drives posts up to 8¾" diameter X 10' tall
71,500 pounds of impact at full stroke
Manual tilt: 15-degree front-back/15-degree side-side
Includes 3-point hitch and secure-stand base

Item # U-ESP6V-ZBD

Zareba Black Diamond ESP6V-ZBD

6-volt solar energizer
0.20 output joules
Low-impedance
Works with polywire, polyrope, polytape, steel wire, and aluminum wire

Item # U-GHPY-Z

Zareba Plastic Gate Handle

Standard-duty plastic gate handle
Insulates against shock
Can be used with all fence wire, except polyrope and polytape

Item # U-UGCC200-EB

ElectroBraid Copper Lead-Out Wire

15,000 volt heavy insulation for wiring
Can be used to connect energizer to fence, for ground rod connections, or under gates
Always use copper to copper connections
200' roll

Item # CGT

Gripple T-Clip

For use with 10 to 14 gauge wire
Secures wire at start or end of the fence line
No knotting or stapling required
Recommended for woven wire fence

Item # PD80H

Kencove PD80H Post Driver

Drives posts up to 7⅛" diameter X 10' tall
30,000 pounds of impact at full stroke
Hydraulic tilt: 15-degree front-back/15-degree side-side
Includes 3-point hitch and secure-stand base

Item # TTSDGF

Fuel Cell for Kencove Fence Staple Gun

Liquid petroleum gas fuel cell for FSG175 Fence Staple Gun
Approximately 1,000 shots per fuel cell

Item # U-EAC20M-RSS

Red Snap'r Steel EAC20M-RSS

110-volt, plug-in energizer
1.0 output joule
Low-impedance
Works with all types of fence wire
Made in the USA

Item # U-ITCPW-RS

Red Snap'r Wood Post/T-Post Capper Insulator

Fits standard t-posts
For use with steel wire, aluminum wire, polywire, polyrope, and polytape up to 2"
Serves as an insulator for the top line of fence
UV-stabilized

Item # CGT-10-200

Gripple T-Clip - Pack of 10

For use with 10 to 14 gauge wire
Secures wire at start or end of the fence line
No knotting or stapling required
Recommended for woven wire fence

Item # PD100H

Kencove PD100H Post Driver

Drives posts up to 8¾" diameter X 10' tall
71,500 pounds of impact at full stroke
Hydraulic tilt: 15-degree front-back/15-degree side-side
Includes 3-point hitch and secure-stand base

Item # U-EAC40M-RSS

Red Snap'r Steel EAC40M-RSS

110-volt, plug-in energizer
2.0 output joules
Low-impedance
2-year limited warranty
Made in the USA

Item # CGLP

Gripple Large Plus

Use to terminate 7½ to 10 gauge smooth wire
Ceramic locking mechanism for superior grip

Item # PD80SS

Kencove PD80SS Post Driver

Drives posts ties up to 7⅛" diameter X 10' tall
30,000 pounds of impact at full stroke
Manual tilt: 15 degree front-back/15 degree side-side
Includes skid-steer mounting bracket and secure-stand base

Item # CGLP-10-120

Gripple Large Plus - Pack of 10

Use to terminate 7½ to 10 gauge smooth wire
Ceramic locking mechanism for superior grip

Item # PD100SS

Kencove PD100SS Post Driver

Drives posts up to 8¾" diameter X 10' tall
71,500 pounds of impact at full stroke
Manual tilt: 15-degree front-back/15-degree side-side
Includes skid-steer mounting bracket and secure-stand base

Item # U-G330414

Gallagher Wrangler

110-volt, plug-in energizer
0.75 output joules
Indicator light flashes with every pulse
Low-impedance

Item # CGB

Gripple Barbed Wire Connector

Use to terminate 12½ gauge barbed wire
Simple and effective way to join or tension wire

Item # PD80HSS

Kencove PD80HSS Post Driver

Drives posts up to 7⅛" diameter X 10' tall
30,000 pounds of impact at full stroke
Hydraulic tilt: 15 degree front-back/15 degree side-side
Includes skid-steer mounting bracket and secure-stand base

Item # CGB-10-200

Gripple Barbed Wire Connector - Pack of 10

Use to terminate 12½ gauge barbed wire
Simple and effective way to join or tension wire

Item # PD100HSS

Kencove PD100HSS Post Driver

Drives posts up to 8¾" diameter X 10' tall
71,500 pounds of impact at full stroke
Hydraulic tilt: 15-degree front-back/15-degree side-side
Includes skid-steer mounting bracket and secure-stand base

Item # CG1

Gripple 1

Use to terminate 11 to 15 gauge wire
Simple and effective way to join or tension wire

Item # CG1-20-200

Gripple 1 - Pack of 20

Use to terminate 11 to 15 gauge wire
Simple and effective way to join or tension wire

Item # MCCHD

Heavy-Duty Single-Throw Cut-Out Switch

Two sets of stainless contacts
Easy knife movement with pivot bolt

Item # U-CG1

Gripple 1, Old-Style

Use to easily tension or terminate wire at end posts
Simply push the wire into the end, leaving a tail for easy adjustment or tensioning
To increase wire tension, simply pull the wire through even more
For use with 11 to 15 gauge wire
NON-RELEASABLE, old-style design

Item # CGS

Gripple Small

Use to tension 13 to 17 gauge mild wire
Simple and effective way to join or tension wire
Patented ceramic locking mechanism

Item # U-20401

Donalds-Style Stainer

Easily adjusts wire tension on the fence line
Aluminum cog
Galvanized strap
Designed to be used with a ½" drive ratchet or crescent wrench

Item # CGS-20-300

Gripple Small - Pack of 20

Use to tension 13 to 17 gauge mild wire
Simple and effective way to join or tension wire
Patented ceramic locking mechanism

Item # CGJ

Gripple Jumbo

Use to terminate 10 to 12½ gauge wire
Simple and effective way to join or tension wire
Max load = 1,320 pounds

Item # U-MP-5E

Fi-Shock Ceramic Wood Post Insulator

Single-groove wood-post insulator with washer and double-headed nail
Can be used with steel wire, aluminum wire, polyrope and polywire

Item # CGJ-10-120

Gripple Jumbo - Pack of 10

Use to terminate 10 to 12½ gauge wire
Simple and effective way to join or tension wire
Max load = 1,320 pounds

Item # CGT2

Gripple T-Clip 2

For 7½-10 gauge wire and 12½- 15 ga barbed wire
Use to secure wires at the beginning or end of a fence line
No need to knot or staple the wire, simply twist and push to engage the internal spring
Recommended for woven wire fence

Item # CGT2-10-120

Gripple T-Clip 2 - Pack of 10

For 7½-10 gauge wire and 12½- 15 ga barbed wire
Use to secure wires at the beginning or end of a fence line
No need to knot or staple the wire, simply twist and push to engage the internal spring
Recommended for woven wire fence

Item # CGD4

Gripple Dynamic #4

Ideal for heavy load anchoring and structural bracing
Quick and simple installation
Fits 4mm (⁵⁄₃₂") - 4.75mm (³⁄₁₆") wire
Maximum Load 1,650 lbs - 2,200 lbs
Unlock and re-tension without releasing the load

Item # CGKEY

Gripple Adjustment Key

Adjust or release Gripple connectors
Use with t-clips, small, medium, and large Gripples

Item # CGKK

Gripple Adjustment Keys on Retractable Keychain

Conveniently keychain with 4' retractable cord
Includes 2 Gripple Adjustment Keys
Keys are compatible with t-clips, small, medium, and large Gripples

Item # CGWT

Gripple Twister

Wraps around wire end to prevent injury
Use with 10 to 14 gauge wire

Item # MCDHD

Heavy-Duty Double Cut-Out Switch

Highly visible handle
Can be changed to a double throw switch

Item # PDSHD8H

Kencove PD8H Post Driver

Drives posts up to 7⅛" diameter X 10' tall
30,000 pounds of impact at full stroke
Hydraulic tilt: 15-degree front-back/15-degree side-side
Hydraulic requirements: 3-4 GPM @ 1,500 PSI

Item # U-EAC25M-EB

ElectroBraid EAC25M-EB

110-volt, plug-in energizer
2.5 output joules
Ultra-low-impedance
For all animal types

Item # JH3

SAFE-FENCE 1½" Electric Tape

15 stainless-steel conductors
High strength and visibility
20-year limited warranty
Made in USA

Item # GW2

KIWI Gate Wheel 2"

Ideal for large, heavy gates
Bolts onto 1.625" to 2" tube gates

Item # PGD2000

Titan PGD2000

Powerful and portable gas-powered post driver
Powered by 1.3 horsepower, Honda 4-stroke engine
2" barrel accepts posts from 1" to 1⅞" in diameter
1" adapter sleeve included for ¾" to 1" posts
Weighs 35 pounds

Item # GLA

KIWI Gate Anchor

Hold gate open in any position
Prevents gate end from sagging or swinging
For use with 1 5/8" - 2" tube gates

Item # MCP

Swivel Cut-Out Switch

Spring tightened
Stainless steel knife/contacts

Item # PGD3200

Titan PGD3200

Powerful and portable gas-powered post driver
Powered by 1.3 horsepower, Honda 4-stroke engine
3¼" barrel accepts posts from 2" to 3⅛" in diameter
2" adapter sleeve included for 1" to 2" posts
Weighs 45 pounds

Item # U-SS-725CS

Havahart SS-725CS

110-volt, plug-in energizer
Use to contain pets or to keep critters out
Includes a mounting stake for easy installation
Continuous AC output - NOT FOR USE with tape, twine, or electric netting

Item # DGUMB

Universal 3-Point Mounting Bracket

For use with Kencove or KIWI Post Drivers
Retractable stabilizer legs
Includes Category I and II pins

Item # F1S

1" Rod Clip Stainless Steel

For use with 1" rod posts
Stainless steel
Long tail

Item # U-PW200PG

Power Wizard Pet & Garden Energizer

0.20-joule energizer
110-volt plug-in energizer
Low-impedance
Ideal for pets and gardens

Item # PV4CRS

Vector Model 4 Post Driver w/ Rock Spike

Drives posts up to 12' tall and up to 12" diameter
130,000 pounds of impact at full stroke
840-pound solid steel hammer
Includes rock spike with swing arm

Item # U-EAC2M-Z

Zareba EAC2M-Z

115-volt, plug-in energizer
0.05 output joules
Controls up to 2 miles of fence
Low-impedance
Ideal for dogs, rabbits, and poultry

Item #

Item # EKD16WI

Kencove Wi-Fi Dual-Purpose Energizer

16-joule output
Can operate on a 110-volt electric plug or a 12-volt battery
Wi-Fi compatibility allows you to monitor the voltage and turn on or off from your mobile phone
Low-impedance
2-year warranty includes lightning damage

Item # EKD16WIFF

Kencove Wi-Fi Dual-Purpose Energizer w/ Fault Finder

16-joule output
Can operate on a 110-volt electric plug or a 12-volt battery
Wi-Fi compatibility allows you to monitor the voltage and turn on or off from your mobile phone
Low-impedance
2-year warranty includes lightning damage
Includes VPK Fault Finder and Voltmeter

Item # F3C

Rod Clip 3⁄8" - Galvanized

Galvanized spring steel
For use with 3/8" rods

Item # H1PE

Brace Pin 10"

Hot-dip galvanized
10" x .35"

Item # H4PE

Brace Pin 4"

Hot-dip galvanized
4" x .35"

Item # HQBS12

Quick Brace

16½', 8 gauge, steel cable with a pre-formed loop
Fast and easy to install
Use to make a single 12' brace

Item # I6X

12" Offset Bracket

Extends wire 12" from post
Great insulation from the bracket wire
Easy to attach onto smooth or woven wire

Item # NAS

Net Anchor Stakes

Includes 10 stakes and 10 tie-back strings
Provides additional support for electric net corner posts

Item # NPF

Replacement Post Foot

Post foot available for ⅜" and ½" solid electric net posts

Item # PF-WR1X0.5X24

Welded Cage Wire, 1"x½" Spacing

14 gauge, hot-dip galvanized welded cage wire
1"x½" spacing
24" height
100' roll
Ideal for rabbit enclosures and cages

Item # PF-WR1X0.5X30

Welded Cage Wire, 1"x½" Spacing

14 gauge, hot-dip galvanized welded cage wire
1"x½" spacing
30" height
100' roll
Ideal for rabbit enclosures and cages

Item # PF-WR1X1X24

Welded Cage Wire, 1"x1" Spacing

14 gauge, hot-dip galvanized welded cage wire
1"x1" spacing
24" height
100' roll
Ideal for rabbit enclosures and cages

Item # PF-WR1X1X30

Welded Cage Wire, 1"x1" Spacing

14 gague, hot-dip galvanized welded cage wire
1"x1" spacing
30" height
100' roll
Ideal for rabbit enclosures and cages

Item # PF-WR1X2X24

Welded Cage Wire, 1"x2" Spacing

14 gauge, hot-dip galvanized welded cage wire
1"x2" spacing
24" height
100' roll
Ideal for rabbit enclosures and cages

Item # PF-WR1X2X30

Welded Cage Wire, 1"x2" Spacing

14 gauge, hot-dip galvanized welded cage wire
1"x2" spacing
30" height
100' roll
Ideal for rabbit enclosures and cages

Item # PGD3875A

Titan PGD3875A

CLOSEOUT ITEM
Powerful and portable gas-powered post driver
Powered by 1.2 horsepower, 4-stroke engine
4" barrel accepts posts up to 3⅞" in diameter
Includes 1", 2", and 3" adapter sleeves for smaller posts
Weighs 45 pounds

Item # PGD3875R

Titan PGD3875R

RECONDITIONED UNIT
Powerful and portable gas-powered post driver
Powered by 1.2 or 1.3 horsepower, 4-stroke engine
4" barrel accepts posts up to 3⅞" in diameter
Includes 1", 2", and 3" adapter sleeves for smaller posts
Weighs 50 pounds

Item # U-155548

ElectroBraid Wood Post Claw Insulator

For use with wood posts
Designed for ElectroBraid fencing
Fiberglass reinforced for strength
Attach with 1" screws

Item # U-2132

Dare 2-Slot Fence Splicing Tool

For quick, trouble-free splices
Use with DP 2-3 sleeves and DPT 3-4 fence taps
Durable design

Item # U-451

Dare Corner/End Insulator Assembly

Perfect for high-tensile fence corners and ends
Withstands continuous strain
Self-locking nut will no vibrate loose
Zinc-plated to resist rust
⅜" high-carbon steel bracket will not bend

Item # U-A-1

Power Wizard Warning Sign

Large black letters printed on both sides
3 pre-drilled holes for hanging or nailing
Highly visible
7½" x 3¾"

Item # U-A5LVT-FS

Fi-Shock Multi-Light Tester

5-light electric fence tester
Reads between 600 and 5,500 volts
Checks energizer for proper output
Allows for diagnostics of shorts on fence
Easy to use

Item # U-DJ.5EATAPERW

½" Electric Ribbon

½" ribbon
Ideal for rotational grazing
5 stainless-steel conductors

Item # U-DJ.5ETAPEW

½" Electric Ribbon

½" ribbon
Ideal for rotational grazing
6 stainless-steel conductors

Item # U-EAC10A-FS

Fi-Shock EAC10A-FS

110-volt, plug-in energizer
Low-impedance
Use for small animals and gardens
Can be used with all fence types

Item # U-EFP48

Zareba Steel Rod Post

Can be used as a line post
Ideal for portable fencing
16 gauge anchor plate
⁵⁄₁₆" diameter

Item # U-FSTXW200

Stafix Extreme Wire

105-times more conductive than standard polywire
6 tinned-copper strands for maximum conductivity
UV-stabilized for long life
Highly visible

Item # U-G669W

Gallagher Polytape Insulator

Wood post insulator
Specially designed for polytape and turbo tape up to 1½" wide
Unique rubber pads prevent tape from moving and fraying
Positive locking and quick release for re-tensioning of tape as required
UV-stabilized

Item # U-GHKPTW-Z

Zareba Polytape Gate Handle Kit

Assemble a one-strand poly tape gate
UV Stabilized
Hardware included

Item # U-GHWKRW-EB

ElectroBraid Gate Kit

Complete set of components for a safe 15' to 20' electric horse gate
Includes one gate handle, one activator plate, two copper split-bolts, one ElectroBraid roller insulator, and four screws
Provides easy access in or out of paddocks

Item # U-HTWT

Zareba Open Tap Crimp Sleeves

Wire Tap 3-4 for 12½ gauge
Secures hot wire connections

Item # U-IRCPY-Z

Zareba Rod Post Cap Insulator

Rod post Insulator
Use with steel wire, aluminum wire, and polywire
UV-stabilized

Item # U-ITRXB-Z

Zareba Backside T-Post Insulator

Backside t-post claw insulators
Holds wire 5" from post
Accommodate polywire, polyrope, steel wire, and aluminum wire
Fits standard t-posts
Made in the USA

Item # U-ITY-BL

Blitzer T-Post Insulator

Wraparound t-post claw insulators
Hold wire 5" from post
Accommodate polywire, polyrope, steel wire, and aluminum wire
Fit standard t-posts
Made in the USA

Item # U-IWHDCLAWW-EB

ElectroBraid Line Post Insulator

Wood post insulator
Designed for ElectroBraid fence
Attach with 1" hex head screws

Item # U-PATE-Z

Zareba Polytape-to-Energizer Connector

Use to connect a strand of polytape to the energizer
Stainless-steel

Item # U-PT25TPX

Red Snap'r T-Post Polytape Insulator

For use on standard t-posts
Extend polytape 5" from post
Accommodate polywire, polyrope, steel wire, aluminum wire, and up to 1½" polytape
Fit standard t-posts
Made in the USA

Item # U-PT25WPX

Red Snap'r Wood Post Polytape Insulator

For use on wood posts
Extend polytape 5" from post
Accommodate polywire, polyrope, steel wire, aluminum wire, and up to 1½" polytape
Nails included
Made in the USA